Asus A7V266-MX - Manual (Page 17)

ASUS A7V266-MX motherboard user guide 1-9
1.7 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any
component.
2. Use a grounded wrist strap or touch a safely grounded object or to a metal
object, such as the power supply case, before handling components to
avoid damaging them due to static electricity.
3. Avoid touching the ICs on components.
4. Whenever you uninstall any component, place it on a grounded antistatic
pad or in the bag that came with the component.
5. Before you install or remove any component, ensure that the ATX
power supply is switched off or the power cord is detached from the
power supply. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
When lit, the onboard LED indicates that the system is ON, in sleep mode or in
soft-off mode, not powered OFF. See the illustration below.
A7V266-MX
®
A7V266-MX Onboard LED
SB_PWR
ON
Standby
Power
OFF
Powered
Off