Agp & p2p bridge control, Agp aperture size [xxxmb, Agp mode [4x – Asus A7V266-MX User Manual
Page 44: Agp fast write [disabled, Agp master 1 ws write [disabled, Agp master 1 ws read [disabled, Agp 3.0 calibration cycle [enabled, Select display device [crt
2-14
Chapter 2: BIOS Information
AGP Aperture Size [XXXMB]
This field sets the size of mapped memory for AGP graphic data.
Configuration options: [4M] [8M] [16M] [32M] [64M] [128M] [256M] [512M] [1G]
AGP Mode [4X]
AGP 4X transfers video data at 1066MB/s and is backward-compatible to AGP 1X
video card. When set to [1X], the AGP interface only provides a peak data
throughput of 266MB/s even if you are using an AGP 4x card.
Configuration options: [1X] [2X] [4X]
AGP Fast Write [Disabled]
This field enables or disables the AGP Fastwrite function.
Configuration options: [Disabled] [Enabled]
AGP Master 1 WS Write [Disabled]
Configuration options: [Disabled] [Enabled]
AGP Master 1 WS Read [Disabled]
Configuration options: [Disabled] [Enabled]
AGP 3.0 Calibration Cycle [Enabled]
This item is enabled by default.
Select Display Device [CRT]
This item allows you to select the type of display device.
Configuration options: [CRT] [TV] [CRT+TV] [DVI] [CRT+DVI] [TV+DVI]
AGP & P2P Bridge Control
AGP Aperture Size
[128MB]
AGP Mode
[4X]
AGP Fast Write
[Disabled]
AGP Master 1 WS Write
[Disabled]
AGP Master 1 WS Read
[Disabled]
AGP 3.0 Calibration Cycle
Enabled
Select Display Device
[CRT]
TV_Type
[NTSC]
TV_Connector
[CVBS]
AGP & P2P Bridge Control
Press [Enter] to
select.