Asus A7V266-MX - Manual (Page 38)

2-8 Chapter 2: BIOS Information
Date [mm/dd/yy]
Sets the system to the date that you specify (usually the current date). The format
is month, day, year. Valid values for month, day, and year are Month: (1 to 12),
Day: (1 to 31), Year: (1999 to 2099). Use the key to move between the
month, day, and year fields.
Time [hh:mm:ss]
Sets the system to the time that you specify (usually the current time). The format
is hour, minute, second. Valid values for hour, minute and second are Hour: (00 to
23), Minute: (00 to 59), Second: (00 to 59). Use the key to move between
the hour, minute, and second fields.
Drive A [1.44M, 3.5 in.]
Sets the type of floppy drive installed. Configuration options: [None] [360K, 5.25
in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.]
Drive B [None]
Sets the type of floppy drive installed. Configuration options: [None] [360K, 5.25
in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.]
Chassis intrude detection [Enabled]
Enable this option to activate the chassis intrusion feature of the motherboard.
Configuration options: [Enabled] [Disabled]
2.4 Main Menu
Change the day, month,
year and century.
Date (mm:dd:yy) Wed, May 28 2003
Time (hh:mm:ss) 15 : 30 : 30
Drive A [1.44M, 3.5 in.]
Drive B [None]
IDE Primary Master [ST321122A]
IDE Primary Slave [ASUS CDS520/]
IDE Secondary Master [None]
IDE Secondary Slave [None]
Chassis intrude detection [Enabled]
Set Supervisor Password Clear
Set User Password Clear
Security Option [Setup]
Installed Memory [256MB]
Halt On [No Errors]