Asus A7V266-MX - Manual (Page 53)

ASUS A7V266-MX motherboard user guide 2-23
2.6 Power Menu
ACPI Function [Enabled]
Allows you to enable or disable the ACPI 2.0 support.
Configuration options: [Enabled] [Disabled]
ACPI Suspend Mode [S1 (POS)]
Allows you to select the ACPI state to used for system suspend.
Configuration options: [S1 (POS)] [S3 (STR)] [S1 & S3]
Power Management Option [User Define]
Configuration options: [User Define] [Min Saving] [Max Saving]
HDD Power Down [Disabled]
Shuts down any IDE hard disk drives in the system after a period of inactivity as
set in this user-configurable field. This feature does not affect SCSI hard drives.
Configuration options: [Disabled] [1Min]...[15Min]
Auto Suspend Timeout [Disabled]
Sets the time period before the system goes into suspend mode.
Configuration options: [Disabled] [1Min] [2Min] [4Min] [6Min] [8Min] [10Min] [20Min]
[30Min] [40Min] [1Hour]
Video Off Option [Suspend -> Off ]
This field determines when to activate the video off feature for monitor power
management. Configuration options: [Suspend -> Off] [Always On]
ACPI Function [ Enabled ]
ACPI Suspend Mode [S1 (POS)]
Power Management Option [User Define]
HDD Power Down [Disabled]
Auto Suspend Timeout [Disabled]
Video-off Option [Suspend -> Off]
Video Off Method [V/H Sync+Blank]
PWR Button < 4 Sec [Instant-off]
Run VGA BIOS if S3 Resume [Auto]
AC Loss Auto Restart [Previous State]
C.O.P. Control [85 degree]
Power Up Control
Hardware Monitor
Press [Enter] to
select [Enabled] or
[Disabled].