Siemens KI82LAD30 - Manual (Page 29)

en
29
Operating tips
■
After the appliance has been switched
on, it may take several hours until
the set temperature has been
reached.
Do not put any food in the appliance
beforehand.
■
While the refrigeration unit is running,
water droplets or hoarfrost may form
at the rear panel of the refrigerator.
This is due to functional reasons. It
is not necessary to scrape off the frost
or wipe off the water droplets. The
rear panel defrosts automatically. The
condensation collects in the drainage
channel and is carried to the
refrigeration unit where it evaporates.
Fig. #
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.
Freezer compartment
The temperature in the refrigerator
compartment will affect the temperature
in the freezer compartment. Change the
temperature in the refrigerator
compartment in order to change the
temperature in the freezer compartment.
Temperatures which are set higher in the
refrigerator compartment will increase
temperatures in the freezer
compartment.
Alarm function
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than two minutes. Close
the door to switch off the warning signal.
Switching off the alarm
Fig. "
Press the alarm button 5 to switch off
the warning signal.
Super function
When Super function is switched on,
the freezer compartment and refrigerator
compartment will become colder.
Notes
■
There may be increased operating
noises.
■
The Super function is not required
to freeze small quantities of food.