beautypg.com

Odours, Take all food out of the appliance, Clean all packages – Siemens KI86SAD40 User Manual

Page 39: Switch the appliance on again, Store food in the appliance, Light (led), Tips for saving energy, If required, use an insulating plate, Select 560 mm cavity depth, Open the appliance as briefly as possible

background image

en

39

Odours

If you experience unpleasant odours:

1. Switch off the appliance with the

On/Off button. Fig. 2/1

2. Take all food out of the appliance.
3. Clean interior (see chapter “Cleaning

the appliance”).

4. Clean all packages.
5. Seal strong smelling food in order to

avoid odours from forming.

6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation of

odours is still occuring after 24 hours.

Light (LED)

Your appliance features a maintenance-
free LED light.
These lights may be repaired by
customer service or authorised
technicians only.

Tips for saving energy

Install the appliance in a dry, well
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.

Select 560 mm cavity depth.
A smaller cavity depth will result in
a higher energy consumption.

Allow warm food and drinks to cool
down before placing in the appliance.

Thaw frozen food in the refrigerator
compartment and use the low
temperature of the frozen food to cool
refrigerated food.

Open the appliance as briefly as
possible.

Regularly defrost the freezer
compartment to remove the layer
of frost.
A layer of hoarfrost will impair
refrigeration of the frozen food
and increase power consumption.

Ensure that the freezer compartment
door is always closed properly.

Occasionally clean the rear of the
appliance to prevent an increased
power consumption.

The arrangement of the fittings does
not affect the energy rating of the
appliance.

This manual is related to the following products: