beautypg.com

Preparing milk froth, Maintenance and daily cleaning – Siemens TE502206RW User Manual

Page 15

background image

11

en

Preparing milk froth

A

Risk of burns

The milk frother (6) gets very hot. Hold the

milk frother (6) by the plastic part only.

Tip: You can foam the milk first and then

dispense coffee, or foam the milk separately

and pour it onto the coffee.

The appliance must be ready for use with

the cleaned milk frother attached.

1. Press the

h

button (11).

The

h

button (11) flashes and the

appliance now heats up for approx. 20

seconds. The display then shows

Pull

milk frother

.

2. Immerse the milk frother so that it

reaches the bottom of a cup or glass

that is one-third filled with milk.

3. Pull the milk frother (6) to open it.

A

Risk of scalding

Splashes of milk can scald. Carefully open

the milk frother (6). Do not touch the outlet

or aim it at anyone. The milk frother (6)

gets very hot. Hold the milk frother (6) by

the plastic part only. After use, allow to cool

down first before touching. Use this appli-

ance only after the milk frother (6) has been

fully assembled and installed.

4. Close milk frother (6) by pushing it in.

Tip: For optimal milk froth quality, use cold

milk with a fat content of at least 1.5 % if

possible.

Important: Dried milk residue is difficult

to remove, so the milk frother (6)

must be

cleaned with lukewarm water immediately

after use and rinse using the

Rinse milk

system

programme.

Maintenance and

daily cleaning

A

Risk of electric shock

Unplug the appliance before cleaning it.

Never immerse the appliance in water.

Do not use a steam cleaner.

● Wipe the outside of the appliance with a

soft, damp cloth.

● Do not use abrasive cloths or cleaning

agents.

● Always remove any limescale, coffee, milk

or descaling fluid residue immediately.

Such residue can cause corrosion.

● New sponge cloths may contain salts.

Salts can cause rust film on stainless

steel and must therefore be washed out

thoroughly before use.

● Pull the drip tray (8c) with the coffee

grounds container (8b) forward and out.

Remove the panel (8a) and the grate

(8d). Empty and clean the drip tray and

coffee grounds container.

● Remove drawer (4) and clean.