Siemens TE503209RW - Manual (Page 10)

6
en
“Drink selection” rotary knob
This rotary knob (14) is used
to select the required drink
and the per-cup quantity� It
is also used to change user
settings�
a
to
c
Small Espresso
Espresso
Small Café Crème
Café Crème
Large Café Crème
b
to
d
2 small Espresso
2 Espresso
2 small Café Crème
2 Café Crème
2 large Café Crème
e
Rinse machine
f
Rinse milk system
N.B.: If a drink is selected that cannot be
prepared, Invalid combination appears in
the display� Change the coffee strength or
the selected drink�
Milk frother
Pull the milk frother (6) out to open it and
push it back in to close it�
Rotary selector
To dispense milk froth – for example for a
latte macchiato or cappuccino – turn the
j
symbol to the front�
To dispense warm milk, turn the
i
symbol
to the front�
To dispense hot water, set the rotary
selector to the horizontal position�
Display messages
The display (15) shows not only the current
operating status, but also various messages
that give you status information or let
you know when you need to take action�
As soon as you have taken the necessary
action, the message disappears and the
menu for drink selection is displayed again�
aromaDouble Shot
The longer the coffee is brewed, the more
bitter substances and undesired aromas
are released� This has a negative effect on
the taste and makes the coffee less easily
digestible� So for extra strong coffee the
TE503 has a special aromaDouble Shot
function� When half the quantity has been
prepared, coffee is ground and brewed
again so that only the pleasant, aromatic
scents are released�
The aromaDouble Shot function is activated
with the following settings: