Siemens TE809201RW - Manual (Page 21)

17
en
Dispensing hot water
¡ Risk of burns!
The milk frother 10 gets very hot. After use,
allow to cool down fi rst before touching.
The appliance must be ready for use.
● Place the pre-warmed cup or glass under
the outlet of the milk frother 10.
● Select the required setting for Hot water
by turning the rotary knob 6.
● Press the start button 8.
Please remove suction hose ▶ start
● Remove the milk suction hose 10c and
press the start button 8.
Hot water runs out of the milk frother
outlet 10.
Press the start button 8 again to cut the
process short.
Note: It is possible to set the temperature of
the hot water (see “Menu settings”).
Maintenance and
daily cleaning
¡ Danger of electric shock!
Unplug the appliance before cleaning it.
Never submerse the appliance in water.
Do not use a steam cleaner.
● Wipe the outside of the appliance with a
soft, damp cloth.
● Do not use any cleaning agents that
contain alcohol or spirits.
● Do not use abrasive cloths or cleaning
agents.
● Always remove any limescale, coffee,
milk, cleaning or descaling fl uid residue
immediately. Such residue can cause cor-
rosion. New sponge cloths may contain
salts. Salts can cause rust fi lm on stain-
less steel and must therefore be washed
out thoroughly before use.
● Pull the drip tray 23 with the coffee
grounds container 23c forwards and out.
Remove the panel 23a and grate 23b.
Empty and clean the drip tray and coffee
grounds container.
K Do not put the following items in the
dishwasher: Panel of drip tray 23a,
powder compartment 18, brewing unit
20, water tank 11, aroma cover 16 and
stainless steel milk container.
J The following parts may be cleaned
in the dishwasher: Drip tray 23, grate
23b, coffee grounds container 23c,
measuring spoon 14 and the individual
parts of the milk container cover.
TE809_1RW.indb 17 08.05.2013 14:32:35