beautypg.com

Preparing milk froth and warm milk – Siemens TE809201RW User Manual

Page 20

background image

16

en

Drink preparation with milk

The appliance must be ready for use.

● Place the suction pipe

10d of the milk

frother

10 deep in the milk container 26.

● Swivel the coffee outlet

9 to the right until

it clicks into place.

● Place the pre-warmed cup or glass under

the coffee outlet

9 and milk frother 10.

● Select the required

Caffe Latte,

Macchiato, Cappuccino or My coffee by

turning the rotary knob

6.

● Open the powder compartment

18.

● Pour in no more than 2 level measuring

spoons

14 of ground coffee.

¡

Warning!

Do not use whole beans or instant coffee.

● Close the powder compartment

18.

● Press the

start button 8.

First milk is delivered into the cup or glass.

Then the coffee is brewed and dispensed

into the cup or glass.

Important: Dried milk residue is difficult

to remove, so the milk frother

10 must be

cleaned with lukewarm water immediately

after use (see “Cleaning the milk system”).

Note: Repeat the procedure for another

cup of coffee / milk drink. If coffee is not

dispensed within 90 seconds, the brewing

chamber empties automatically to avoid an

overflow. The appliance rinses.

Preparing milk froth and

warm milk

¡

Risk of burns!

The milk frother

10 gets very hot. After use,

allow to cool down first before touching.

The appliance must be ready for use.

● Place the suction pipe

10d of the milk

frother

10 deep in the milk container 26.

● Place the pre-warmed cup or glass under

the outlet of the milk frother

10.

● Select the required setting

Milk froth or

Warm milk by turning the rotary knob 6.

● Press the

start button 8.

Milk froth or warm milk flows from the outlet

of the milk frother

10.

Press the

start button 8 again to cut the

process short.

Info: When preparing warm milk, you may

hear a whistling sound. This is caused by

the milk frother for technical reasons.

Tip: For optimal milk froth quality, use cold

milk with a fat content of at least 1.5 % if

possible.

Important: Dried milk residue is difficult

to remove, so the milk frother

must be

cleaned with lukewarm water immediately

after use (see “Cleaning the milk system”).

TE809_1RW.indb 16

08.05.2013 14:32:35