beautypg.com

Calc‘n‘clean – Siemens TE506209RW User Manual

Page 19

background image

15

de

en

appears in the display. To start the cleaning

procedure, press the

start button (10).

The display will guide you through the

programme.

Empty drip tray

Insert drip tray

● Empty drip tray (8) and replace them.

Cleaning in progress

The appliance rinses twice.

Open drawer

● Open the drawer (4).

Fill cleaner

● Drop a Siemens cleaning tablet in the

drawer (4)

and close.

Cleaning in progress

The cleaning pro gramme will now run for

about 8 minutes.

Empty drip tray

Insert drip tray

● Empty drip tray (8) and replace them.

The appliance has inished cleaning is

ready for use again.

Calc‘n‘Clean

Duration: approx. 35 minutes.

Calc‘n‘Clean combines the separate func-

tions of descaling and cleaning. If both

programmes are due to be run soon, the

espresso machine automatically suggests

this service programme.

Important: If there is a ilter in the water

tank (17), it needs to be removed before the

service programme is run.

If the message

Calc‘n‘Clean required!

appears on the display, press the

e

off /

j

button (13) for 3 seconds and then press

the

start button (10). The service pro-

gramme will start.

To run Calc‘n‘Clean before being prompted,

press the

e

off /

j

button (13) for at least

3 seconds. Then press the

e

off /

j

but-

ton (13) briely twice. Turn the upper rotary

knob (15) until

Start Calc‘n‘Clean

appears in the display. To start Calc‘n‘Clean,

press the

start button (10).

The display will guide you through the

programme.

Empty drip tray

Insert drip tray

● Empty drip tray (8) and replace them.

Calc‘n‘Clean in progress

The appliance rinses twice.

Open drawer

● Open the drawer (4).

Fill cleaner

● Drop a Siemens cleaning tablet in the

drawer (4)

and close.

N.B.: If the water ilter (20) is activated, the

display will prompt you to remove the ilter

(20) and then press the

start button (10)

again. Remove the ilter now if you have not

already done so. Press the

start button (10).

Fill descaler

Press start

● Pour lukewarm water into the empty wa-

ter tank (17) up to the

0,5l mark and dis-

solve 2 Siemens descaling tablets in it.

● Press the

start button (10).

Place container

Press start

● Place a receptacle with a capacity of at

least 1 litre under the outlet (6a).

● Press the

start button (10).

Calc‘n‘Clean in progress

The descaling pro gramme will now run for

about 22 minutes.