Siemens TE506209RW - Manual (Page 12)

8
de en
You can set the following:
Shut off : Here you can set the time span
after which the appliance automatically
switches off following the last drink prepa-
ration. A time between 15 minutes and 4
hours can be set. The default time is 1 hour,
but this can be shortened to save energy.
Filter : Here you can set whether a water
ilter is being used. If a water ilter is not be-
ing used, turn the setting to No / Old . If a
water ilter is being used, turn the setting to
Activate filter . New water ilters have to
be rinsed before use (see “Water ilter” on
page 7).
Start Calc‘n‘Clean : The service pro-
grammes ( Calc‘n‘Clean / descaling /
cleaning ) can be selected manually here.
Press the start button (10) and run the
selected programme (see “Service Pro-
grammes” on page 13).
Temp. : The brewing temperature ( high /
middle / low ) can be set here.
Language : The display language can be
set here.
Water hardness : The water hardness
setting can be adjusted on this appliance.
It is important to set the water hardness
correctly, so that the appliance indicates
accurately when the descaling programme
should be run. The factory setting for the
water hardness is 4.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
Dip the test strip briely in water, gently
shake off any drips, and check the result
after one minute.
Level Water hardness
German (°dH) French (°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54
Drink counter : This displays how many
drinks have been dispensed since the appli-
ance was irst put into operation.
Adjusting the grinding
unit
The rotary selector (3) adjusts the grind set-
tings from coarse to ine.
Warning
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged. Do not reach into the grinding
unit.
● While the grinding unit is running, adjust
the rotary selector (3) from ine ( a: Turn
anticlockwise) to coarse ( b: Turn clock-
wise) as required.
a b
Note: The new setting will not become ap-
parent until after the second cup of coffee.
Tip: For dark roast coffee beans, choose a
iner grind, for lighter beans a coarser grind.