Siemens TE506209RW - Manual (Page 18)

14
de en
Order number Retail Customer
service
Cleaning
tablets
TZ60001 310575
Descaling
tablets
TZ60002 310967
Important: If there is a ilter in the water
tank (17), it needs to be removed before the
service programme is run.
Descaling
Duration: approx. 25 minutes.
Important: If there is a ilter in the water
tank (17), it needs to be removed before the
descaling programme is run.
If the message Descale required! ap-
pears on the display, press the
e
off / j but-
ton (13) for 3 seconds and then press the
start button (10). The descaling programme
will start.
To descale the appliance before being
prompted, press the
e
off / j button (13) for
at least 3 seconds. Then press the
e
off / j
button (13) briely twice. Turn the upper
rotary knob (15) until Start descaling
appears in the display. To start the descal-
ing procedure, press the start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
N.B.: If the water ilter (20) is activated, the
display will prompt you to remove the ilter
(20) and then press the start button (10)
again. Remove the ilter now if you have not
already done so. Press the start button (10).
Fill descaler
Press start
● Pour lukewarm water into the empty wa-
ter tank (17) up to the 0,5l mark and dis-
solve 2 Siemens descaling tablets in it.
● Press the start button (10).
Place container
Press start
● Place a receptacle with a capacity of at
least 0.5 litres under the outlet (6a).
● Press the start button (10).
Descale in progress
The descaling pro gramme will now run for
about 20 minutes.
Clean / Fill water tank
Press Start
● Rinse the water tank (17) and reill it with
fresh water up to the max mark.
● Press the start button (10).
Descale in progress
The descaling pro gramme now runs for
about 3 minutes and rinses the appliance.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
Replace the ilter if one is being used. The
appliance has completed descaling and is
ready for use again.
Cleaning
Duration: approx. 10 minutes.
If the message Clean required! ap-
pears on the display, press the
e
off / j
button (13) for 3 seconds and then press
the start button (10).
The cleaning programme will start.
To clean the appliance before being prompt-
ed, press the
e
off / j button (13) for at
least 3 seconds. Then press the
e
off / j
button (13) briely twice. Turn the upper
rotary knob (15) until Start cleaning