Kenwood NX-210G User Manual
Page 33
19
6 Press
the
PTT switch or Side 2 key to initiate the call.
•
“
has been successfully transmitted.
■ Receiving
The icon will flash and a calling ID or text message will
appear when a Status call is received. Press any key to
return to normal operation.
■ Reviewing Messages in the Stack Memory
1 Press the key programmed as Stack, or press and hold
the key programmed as Selcall, Status, or Selcall +
Status to enter Stack mode.
•
The last received message is displayed.
2 Press /
to select the desired message.
•
Message types are identified as follows:
I: Caller ID, S: Status Message, M: Short Message
•
Press and hold
for 1 second to cycle the display
information as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp
3 Press to return to normal operation.
•
To delete the selected message, press
or #. To
confirm the deletion, press
or .
•
To delete all messages, press and hold
or # for
1 second. To confirm the deletion, press
or .
S
HORT
/L
ONG
M
ESSAGES
Received short messages are displayed the same as Status
messages and are stored in the same stack memory.
To send short messages, and to send and receive long
messages, you must connect the transceiver to a PC. Ask
your dealer for details.