Kenwood NX-210G - Manual (Page 22)

8
• Telephone Disconnect 3
• Transceiver Password
• Vibrator
• Voice
Memo 2
• VOX 11
• Zone Delete/Add
• Zone Down
• Zone Up
1 Available only for Analog Conventional operation.
2 Available only if the VGS-1 optional board has been installed.
3 Available only for Analog Trunking operation.
4 Available only for Analog Conventional, Analog Trunking, and NXDN
Conventional operation.
5 Available only for NXDN Trunking operation.
6 Can be programmed only on the Selector knob.
7 Available only for NXDN Conventional operation.
8 Can be programmed only on the Auxiliary key and the optional
speaker/ microphone PF1 (orange) key.
9 Available only for NXDN Conventional and NXDN Trunking operation.
10 Available only for Analog Conventional and Analog Trunking
operation.
11 Available only for Analog Conventional and NXDN Conventional
operation.
12 Can be programmed only on the microphone programmable function
keys.
13 Available only for NX-210 and NX-210G.