Kenwood NX-210G - Manual (Page 18)

4
GETTING ACQUAINTED
a Selector knob
Rotate to select a zone or channel/group ID (default).
b Power switch/ Volume control
Rotate to turn the transceiver ON/OFF and to adjust the
volume.
c Transmit/ Receive/ Battery low indicator
If enabled by your dealer, lights red while transmitting,
green while receiving a call (Conventional channels only),
and orange when receiving an optional signaling call
(DTMF signaling, etc.). Blinks red when the battery power is
low while transmitting.
d Auxiliary key
Press to activate its programmable function {page 7}.