Getting acquainted, Front and rear views – Kenwood NX-920G User Manual
Page 9
3
GETTING ACQUAINTED
FRONT AND REAR VIEWS
a
(Power) switch
Press to switch the transceiver ON or OFF.
b
/ keys
Press to activate their programmable functions {page 5}.
c
/ keys
Press to activate their programmable functions {page 5}.
d TX/RX Indicator
Lights red while transmitting and green while receiving a signal. Flashes orange when
receiving an optional signaling call.
e Microphone jack
Insert the microphone plug into this jack.
f Status Indicator
Lights blue during a specifi ed mode, based on dealer programming.
g
/ S / A / /
■ keys
Press to activate their programmable functions {page 5}.
h Speaker
Internal speaker.
i PTT switch
Press this switch, then speak into the microphone to call a station.
j RF antenna connector
Connect the RF antenna to this connector.
k ACC connector
Connect the ACC to this connector, via the KCT-60.
l External speaker jack
Connect an external speaker to this jack.
m GPS antenna connector
Connect the KRA-40 GPS antenna to this connector.
n Power input connector
Connect the DC Power Cable to this connector.
g
j
a b
c
n
m
k
ef
h
i
l
d