Kenwood NX-920G - Manual (Page 11)

5
PROGRAMMABLE FUNCTIONS
The , , , , , S, A, , C>, and
■ keys can be programmed with the functions
listed below. Ask your dealer for details on these functions.
• None
• 2-tone
1, 10
• Auto Telephone 2
• Autodial
• Autodial
Programming
• AUX A
• AUX B
• Broadcast 3
• Call 1 ~ 6
• CH/GID Down
• CH/GID Recall
• CH/GID Up
• Channel Entry
• CW Message 4
• Direct CH/GID 1 ~ 5
• Display Format
• Emergency 5
• External Speaker
• Fixed Volume
• Forced Search 3
• Function
•
GPS Position Display
• Group ID/Channel Entry
• Group 6
• Group + Short Message 6
• Group + Status 6
• Home CH/GID
• Horn Alert
• Individual 6
• Individual + Short Message 6
• Individual + Status 6
• LCD Brightness
• Lone Worker
• Maintenance
• Monitor
7
• Monitor Momentary 7
• Operator Selectable Tone 1
• Priority-channel Select 8
• Public Address
• Scan
• Scan
Delete/Add
• Scrambler/ Encryption
• Scrambler/ Encryption Code
• Selcall 9
• Selcall + Short Message 9
• Selcall + Status 9
• Send the GPS data
• Short Message
• Site Down 3
• Site Lock 3
• Site Up 3
• Squelch Level 1
• Squelch Off 1
• Squelch Off Momentary 1
• Stack
• Status
• Talk
Around 7
• Telephone Disconnect 2
• Transceiver Password
• Volume Down
• Volume Up
• Zone Delete/Add
• Zone Down
• Zone Up
1 Available only for Analog Conventional operation.
2 Available only for Analog Trunking operation.
3 Available only for NXDN Trunking operation.
4 Available only for NXDN Conventional operation.
5 Emergency can be programmed only on the key. When assigned, the dealer must set
the key assignment hold to “Enable” and second function as “Emergency”.
6 Available only for NXDN Conventional operation and NXDN Trunking operation.
7 Available only for Analog Conventional, Analog Trunking, and NXDN Conventional
operation.
8 Available only for Analog Conventional and NXDN Conventional operation.
9 Available only for Analog Conventional and Analog Trunking operation.
10 Available only for NX-720H/ NX-720HG/ NX-820H/ NX-820HG.