Kenwood NX-920G User Manual
Page 6
ii
CONTENTS
GETTING STARTED ...................................................................................... 1
GETTING ACQUAINTED ............................................................................... 3
PROGRAMMABLE FUNCTIONS .................................................................. 5
BASIC OPERATIONS .................................................................................... 6
SCAN ............................................................................................................. 8
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION ....................... 10
TRUNKING CALLS (ANALOG) ................................................................... 12
DTMF CALLS............................................................................................... 13
ADVANCED OPERATIONS ......................................................................... 15
BACKGROUND OPERATIONS ................................................................... 18
PRECAUTIONS
Observe the following precautions to prevent fi re, personal injury, and transceiver
damage.
• Do not attempt to confi gure the transceiver while driving; it is too dangerous.
• Do not disassemble or modify the transceiver for any reason.
• Do not expose the transceiver to long periods of direct sunlight, nor place it near heating
appliances.
• If an abnormal odor or smoke is detected coming from the transceiver, switch the
transceiver power off immediately, and contact your KENWOOD dealer.
• Use of the transceiver while you are driving may be against traffi c laws. Please check
and observe the vehicle regulations in your area.
• Do not use options not specifi ed by KENWOOD.
◆ The transceiver operates in 12 V negative ground systems only! Check the battery polarity and
voltage of the vehicle before installing the transceiver.
◆ Use only the supplied DC power cable or a KENWOOD optional DC power cable.
◆ Do not cut and/or remove the fuse holder on the DC power cable.
For passenger safety, install the transceiver securely using the supplied mounting bracket and
screw set so the transceiver will not break loose in the event of a collision.