Kenwood TH-D72A - Manual (Page 50)

41
SPECIFICATIONS
General
Frequency
range
Band
A & B
TH-D72A
TX 144 ~ 148 MHz
TX 430 ~ 450 MHz
TH-D72E
TX 144 ~ 146 MHz
TX 430 ~ 440 MHz
Band A
RX 136 ~ 174 MHz
RX 410 ~ 470 MHz
Band B
RX 118 ~ 174 MHz
RX 320 ~ 524 MHz
Mode F1D/ F2D/ F3E
Antenna impedance 50 7
Operating temperature range
–20°C ~ +60°C (–4°F ~ +140°F)
with PB-45L –10°C ~ +50°C (+14°F ~ +122°F)
Rated
voltage
External power supply (DC IN) DC 12.0 ~ 16.0 V (13.8 V nominal)
Battery terminals DC 5.5 ~ 9.0 V (7.4 V nominal)
Ground method Negative
Frequency stability Within ±5 ppm (–10°C ~ +50°C)
Current
Receive with no
signals
Single band Approx. 100 mA
Dual band Approx. 150 mA
Battery Saver ON (Single band) Approx. 30 mA
TNC ON with no signals (Single band) Approx. 135 mA
Transmit with H, 13.8 V (DC IN) Approx. 1.6 A
Transmit with H, 7.4 V (PB-45L) Approx. 2.0 A
Transmit with L, 7.4 V (PB-45L) Approx. 800 mA
Transmit with EL, 7.4 V (PB-45L) Approx. 500 mA
GPS only mode Approx. 60 mA
Dimensions
(W x H x D)
1
Projections not included 58 x 121.3 x 33.2 mm (2.28 x 4.78 x 1.31 in)
Projections included. 58 x 140 x 39.8 mm (2.28 x 5.51 x 1.57 in)
Weight 2 Approx. 370 g (13.1 oz)
1 With Battery pack (PB-45L)
2 Antenna, Battery pack (PB-45L) and Belt hook included.
Note:
X All specifications (General, Transmitter and Receiver) are guaranteed within the amateur radio
band.
X Specifications are subject to change without notice, due to advancements in technology.