Kenwood TH-D72A User Manual
Page 28
19
)5(48(1&<',5(&7(175<
If the desired operating frequency is far from the current frequency, using the
keypad is the quickest way to change the frequency.
1 Press [A/B] to select band A or B, then press [VFO] or [CALL].
2 Press [ENT].
•
The Direct Frequency Entry display appears.
3 Press the numeric keys ([0] ~ [9]) to enter your desired frequency.
4 To set the entered frequency, press [ENT] or [VFO].
•
Pressing [ENT] before entering all of the digits will set the remaining digits to 0.
•
Pressing [VFO] before entering all of the digits will leave the remaining digits at their
previous values.
•
Entering all digits for a frequency will automatically set the frequency without
pressing [ENT] or [VFO].
•
In step 3, after entering 1 ~ 3 digits, pressing [MHz] will set the digits above the
MHz value.
For example, when the displayed current frequency is 432.250:
1
Press [ENT]
° – – – – – –
2
Press [4]
°
4 – – – – –
3
Press [MHz]
° 4 3 4. – – –