Kenwood TH-D72A - Manual (Page 38)

29
APRS - QSY(FREQ)
No. Display Description Setting Values
3A0 QSY in Status QSY in Status Off/ On
3A1 Tone/Narrow Tone/ Narrow Off/ On
3A2 Shift/Offset Shift/ Offset Off/ On
APRS - Pkt.Filter
No. Display Description Setting Values
3B0 Position Limit Position limit Off/ 10 ~ 2500 (mile/ km)
3B1 Filter Type Filter Type See explanation
APRS - Icon
No. Display Description Setting Values
3C0 KENWOOD Icon
See explanation 3C1 Symbol Symbol
3C2 Table Table
APRS - TX Beacon
No. Display Description Setting Values
3D0 Method Method
Manual/ PTT/ Auto/
SmartBeaconing
3D1 Initial Interval Initial interval time
0.2/ 0.5/ 1/ 2/ 3/ 5/ 10/ 20/ 30
min
APRS - Algorithm
No. Display Description Setting Values
3E0 Decay Algorithm Decay algorithm Off/ On
3E1 Prop.Pathing Proportional pathing Off/ On
APRS - SmartBcon1
No. Display Description Setting Values
3F0 Low/High Speed Low speed/ High speed setting
Low speed: 2 ~ 05 ~ 30
High speed: 2 ~ 70 ~ 90
3F1 Slow Rate
Low speed transmission interval
time
1 ~ 30 ~ 100 min
3F2 Fast Rate
High speed transmission interval
time
10 ~ 120 ~ 180 sec