Kenwood KDC-U7056BT - Manual (Page 8)

8 | Quick Start Guide
Listening to the radio/Digital radio
Selecting a tuner source
Press [SRC] to select “TUNER” or “DIGITAL
RADIO” (KDC-U7056DAB only). Refer to
(page 6).
Selecting a band (FM or AM)
(Tuner only)
Press [ R].
Selecting a station/ service
Press [ E] or [F].
The seek mode can be changed. Refer to
<9-5. Tuner setting> or <10-1. Listening
to the Digital Radio> in Instruction
manual
Station preset memory
1
Press [ R] to select a band. (Tuner only)
2
Press [ E] or [F] to select the
station/ service you want to save in the
station preset memory.
3
“TUNER”: Press [ 1/6].
“DIGITAL RADIO”: Press [ 1/6] twice.
Press [ 1/6] again to enter the Mix
Station preset mode. In this mode,
different bands and tuner sources (FM,
AM, Digital Radio etc.) can be saved
in the same preset layer, which allows
you to recall a desired station without
switching between bands and/or tuner
sources. Maximum of 6 stations can be
preset in the Mix Station preset mode.
4
Turn [Control] knob to select preset
number (FM/ Digital Radio: “1” – “18”,
AM: “1” – “6”), and then press and hold
[Control] knob.
Recalling the stations in the
memory
1
Press [ R] to select a band. (Tuner only)
2
Press [ 1/6].
3
Turn [Control] knob to select a preset
number (FM/ Digital Radio: “1” – “18”, AM:
“1” – “6”), and then press [Control] knob.
In the Mix Station preset mode, band
names of tuner sources are displayed as
follows:
FM: FM broadcast station
AM: AM broadcast station
DR: Digital Radio service
[SRC]
[
1/6] [E/F]
[
R] [Control] knob
B59-2188-10_01_13Stepup_QSG_M_En.indd 8 13/06/04 13:37