Kestrel – Kestrel 4500NV Applied Ballistics Meter User Manual
Page 26

26
Replacing the kestrel Impeller
Press only the sides of the impeller when removing and
inserting to avoid damaging the precision hub bearing.
[
Figure 1
]
.
• Press FIRMLY on the impeller module to remove it.
• Insert the new impeller so the side that has the small
triangle (close to the perimeter) faces the front of the
Kestrel when installed.
Figure 1
IMpEllER REplACEMEnT
• Orient one “arm” of the module straight up .
[ Figure 2]. The impeller can be pushed in from either
side.
Figure 2
Kestrel