Kestrel 4500NV Applied Ballistics Meter - Manual (Page 15)

15
• In order to accept the Calibrated DSF value, press
and select “Yes” by pressing .
• Press to exit to return to the Gun
Information screen. The Kestrel will ask if you want to
accept the DSF Calibration.
• To view the DSF table, scroll to "View DSF" in the Gun
menu and press to see what DSFs have been
stored. You may repeat this step for up to six DSF
values. Please remember that entering DSF values at
ranges closer than previously entered will invalidate
DSF values at those longer ranges.
Target screen:
You can customize up to five targets for location,
distance, direction, declination and wind.
• From the Main AB screen, use or to
highlight “Tgt” and press to
enter the Target screen.
• Use and to highlight a
parameter.
• Use and to adjust values for
each parameter.
• Press to enter the
highlighted parameter’s screen.
Mach DSF
1 0.000 1.000
2 0.000 1.000
3 0.000 1.000
4 0.000 1.000
The first row of the DSF table will be
prepopulated with the mach value at which
muzzle velocity was calibrated and a drop
scale factor of 1.00. If ballistics calibration
was not completed, a default value of 1.0 will
be entered for you. However, calibrating your
muzzle velocity after establishing DSF table
will update the first row of your DSF table accordingly without clearing
the rest of your DSF table entries.
TARGET sCREEn
Here you are able to adjust the parameter values as well
as the unit of measure. (For example, yards to meters.)
Multiple Targets
• You may create up to five targets (A-E) by
highlighting “Target” and pressing or to move
on to the next target. After changing targets, the
parameters can be changed by repeating the steps
outlined above.
Active
• The “Active” status of Target A defaults to “Yes”
because the Kestrel must have at least one active
target at all times.
• To make a target active, on the Target screen use
or to highlight “Active” and use or
to change to “Yes.” To make a target inactive, use
or to change to “No.”
• Setting a target’s “Active” status to “Yes” allows you
to view the firing solution for that target on the Main
AB screen.
• If multiple targets are active, you can use or to
scroll between all active targets (and their respective
firing solutions) on the Main AB screen.
TARGET
Active
TR
DoF
Ide g
Yes
998m
000º
0˚
T g t
Wind
100 m
5m p h
000°
3oc
49.24
1.36/3.03
E
W
R
T g t
Wind
549 m
5m p h
000°
3oc
16.58
0.68/1.46
E
W R
HOLD
Windage
Elevation
Target A is current
active target.
Target B is current
active target.