Kestrel 4500NV Applied Ballistics Meter - Manual (Page 22)

22
sETup & OpTIOns
Main setup Menu
• When unit is on, press to access the Main Setup Menu
which is used to customize preferences.
• Press and to scroll through the options.
• Press to select the highlighted option.
Date and Time setup
• After battery installation, the meter will automatically
enter the Date and Time Setting mode.
• Press and to scroll to each option.
• Press and to adjust each option.
• Press the button to exit to the Main Setup Menu.
system
Contrast, auto shutdown, and calibrations can be
reconfigured as needed in the System screen.
• Use
or to highlight one of the following
options:
Contrast
• Press or to increase or decrease the display contrast
from 0 (lightest) to 20 (darkest).
Auto shutdown
• Press or to set the time at which the display will
automatically shut off after non-use (choose 15 min, 60
min, or Off to de-activate auto shutdown).
Battery life will be shortened if the Auto Shutdown is
turned to “Off.”
Baro Cal
Recalibration of this sensor is not recommended without
speaking to an NK technician. See “Barometric Pressure
& Altitude Setup” section on page 9 for calibration
instructions.
Humidity Cal
Recalibration of this sensor is not recommended without
speaking to an NK technician. Full humidity calibration
instructions are provided with the Kestrel RH Calibration
Kits. The unit may also be returned to NK for calibration. Visit
www.nkhome.com for more information.
Date & Time
• Press to enter the Main Setup Menu.
• Use or to highlight Date & Time.
• Press to enter the Date & Time Screen.
• Press or to change each value.
language
Display text can be set to 1 of 5 languages: English, French,
German, Italian, and Spanish.
• Press
or to scroll the desired language.
• Press to select the highlighted language.
Restore
This menu contains options for global settings of all units
to metric or imperial, and returning the reference values for
the Alt and Baro screens to default (0 ft, 29.92 inHg).
To change units:
• Press
or to scroll to the desired setting and
press or .
To return the reference values for the Baro and Alt screens
to default:
• Scroll to Defaults and press or .
WEATHER MODE