Dake Dura Press Force - 40/70/100 - Manual (Page 8)

Force 40 70 100 Ton
8
DTE Oil No.
24 DTE Oil No.26
Gravity 31 26
Maximum Pour 20 F. 20 F
Flash Point 395 F 400 F.
Viscosity @ 100 F. 145-160 290-310
Viscosity @ 130 F. 84.5 144
Viscosity @ 210 F. 44 53
Color 3 Max. 3.5 Max.
Viscosity Index 95 Min. 95 Min.
Also Passes ASTM Rust
Test Yes Yes
Oiliness Additive Yes Yes
Competitive Oils
Equivalent to above
specifications
Cities Service Pacemaker Oil
NO. XD 15
Pacemaker Oil
No. XD30
Exxon Co. Nuto H32 Nuto H68
Gulf Oil Co. Harmony No.
43 AW
Harmony No.
54AW
Pure Oil Co. Puropale Rx
Anti Wear No.
150
Puropale Rx Anti
Wear No. 300
Shell Oil Tellus Oil No.
32
Tellus Oil No. 68
Sinclair Oil Duro Oil
AW16
Duro Oil AW31
Standard Oil Rycon Indl Oil
No. 15
Rycon Indl Oil
No. 31
Sun Oil Co. Sunvis No.
706 No. 816
WR
Sunvis No. 754
No. 831 WR
Sunray DX Oil Co. No. 475
Diamond Roza
L
No. 477
Diamond Roza H
Texaco Rando Oil No.
HD-32
Rando Oil No.
HD-68
To obtain best results oil temperature should not exceed 140 F. When using DTE No. 26 as an
Alternative for DTE No. 24 there might be a slight variation in the ram speeds.
First starting
After filling the reservoir through the fill cap it is necessary to prime the pump. Check that all the
valves and distributors are in the rest position, at the time of starting do not operate any
movement.
To obtain starting it may be necessary to press the reset button in the electrical panel.