Dake Dura Press Force - 40/70/100 User Manual
Page 4
Force 40 70 100 Ton
4
Fig. 1
Unpacking
The machine has shrink wrap on it and any accessories, spare part may be
Packed in cardboard boxes and positioned on top of the work table.
To remove the packing, cut the plastic wrap, taking care not to damage the
Machine or any part of it. Remove the accessories from the top of the work
table, check the contents correspond to the order and to the accompanying
documentation. Remove the lag bolts that hold the press to the skid.
Disposing of the packaging
Fig. 3
The packing will have to be disposed of be the purchaser in compliance with the current
regulations.
Claims shall not be accepted in the event of the goods not being in conformity with order or
with the accompanying documents if they are not notified within five days of the date of
receiving the goods.
Handling and transport and positioning
For handling the machine it is necessary to use special lifting equipment whose maximum lifting
capacity must be no lower than the total weight of the press which can be found on page 2 of this
manual.
Loading and unloading the machine
Use lifting straps are to be used to position as shown below in Fig 4.
WARNING!!!
Be sure the maximum capacity of each strap is greater than the total weight of the press.
Item 2
Item 1