Dake Dura Press Force - 40/70/100 - Manual (Page 5)

Force 40 70 100 Ton
5
Do not make sudden movements when transporting the machine.
The manufacturer is not responsible for damage to the machine while loading or unloading the
press.
Fig. 4
Positioning the press
Simple precautions are necessary for correctly positioning the press always consider the safety
aspect not only in relation to the work carried out with the press, but also to the dangers
originated by the other machines in the workplace.
Do not position on unstable or unleveled floor.
Below in fig. 4 is the allowable distance from the wall, other machines or other objects.
Fig. 4
Commissioning and Starting
Electrical connection
This machine is dual voltage 220 3 phase / 440 3 phase. The amp rating on these machines are
6.8 amps on 220 volt 3 phase and 3.4 amp on 220 volt 3 phase.
WARNING!!!
Only a certified electrician that follows local and state laws is authorized to perform any
type of electrical connection on this machine. The electrical power supply voltage must be
made in compliance with local and state laws.
Pick up
here
Pick up
here