Caution – Dake Utility - Bench User Manual
Page 3

2
SPECIFICATIONS
Machine
Specifications: 10 TON UTILITY BENCH 10 TON UTILITY FLOOR
Press Type
Manual 10 ton Bench
Manual 10 ton Floor
Cylinder Type
Single Acting
Single Acting
Max. Press Capacity
10 ton
10 ton
Ram Diameter
1 ½"
1 ½”
Ram Stroke
6”
6”
Head Travel
Left / Right of center
Left / Right of center
Travel Per Stroke
1/8” approx.
1/8” approx.
Width between uprights
16 ¾”
16 ¾”
Width between channels
3”
3”
Max. Ram to Table
16”
38”
Overall Height
36”
60”
Weight
132 lbs. 149 lbs.
1. INSTALLATION PLACEMENT:
CAUTION
INSTALLATION OF PRESS
PRESS PLACEMENT SELECTION
1. Location of press should be in a well lit area that will not interfere
with other machines or operations.
2. Carefully unbox machine components from shipping carton.
Inspect all packing as not to throw out any parts or manuals.
3. When transporting the machine please use caution. If using a sling
have someone steady the machine while transporting it.
4. Install your press on a sturdy level floor surface, or work bench.
The machine must be anchored to the floor or workbench
securely.
5. After installing the press, use the kerosene or degreasing product
to clean off the anti-rust oil which was applied at the factory. Then
wipe machined surfaces (such as ram) with a light coating of
lubricant oil.