Dake Utility - Bench User Manual
Page 11

10
7. TROUBLE SHOOTING:
Problem
Solution
Oil leaking around ram.
Put ram under full pressure for 24 hours. If problem continues contact Dake
Ram is jerky or sluggish
With release valve open repeatedly pump the handle to bleed air from lines.
Ram does not return fully
Open and close release valve several times. If continues contact Dake.
Pump will not pump
Make sure valve is fully closed. Contact Dake.
Leaking by gauge
Place Teflon tape to threads and reinstall.
Leaking by hoses
Check all fitting, make sure they are tight. Look for hole or abrasions.
Will not reach max. tonnage Check that the valve is closed fully. Bleed system, Contact Dake.
Will not hold pressure
Some bleed off will occur over time. Check valve is closed fully