Summers 50' Superroller - Manual (Page 12)

SECTION 2 - ASSEMBLY
2-2
GENERAL SAFETY PRACTICES
YOU ARE RESPONSIBLE
for the safe assembly of the
machine.
DO NOT ALLOW CHILDREN
or other unauthorized persons
within the assembly area.
W E A R P E R S O N A L
PROTECTIVE EQUIPMENT
which includes a hard hat,
eye protection, work gloves
and steel toed boots with slip
resistant soles.
DO NOT MODIFY equipment
or substitute parts in any way.
Unauthorized modification may
impair the function and/or safety
of the machine.
USE SUITABLE LIFTING
DEVICE for components which
could cause personal injury.
BLOCK UP ANY RAISED PART
of the machine. Be sure machine
is stable after blocking.
ALWAYS INSPECT LIFTING
CHAINS AND SLINGS for
damage or wear.
BE SURE LIFTING DEVICE
IS RATED TO HANDLE THE
WEIGHT.*
STOP ENGINE, place all
controls in neutral, set parking
brake, remove ignition key and
wait for all moving parts to stop
before servicing or adjusting.
ALWAYS make sure Land
Roller is lowered into field
position (cylinders extended), it
is blocked to prevent movement
and that pressure is relieved
from hydraulic circuits before
servicing.
USE EXTREME CARE when
assembling, servicing or
adjusting.
*APPROXIMATE WEIGHTS OF COMPONENTS (36” / 42” ROLLER)
PN DESCRIPTION WEIGHT (LB)
8P4000 HITCH 1405
CENTER SECTION 2424
WING 1300 / 1200
8P4213 ROLLER, 13’ (42”) 3925
ROLLER, 15’ 3409 / 4285
PN DESCRIPTION WEIGHT (LB)
8P4205 ROLLER, 17-1/2’ (36”) 3913
8P5000 UPRIGHT TRNSPRT REST 162
8P5020 BRACE TRNSPRT REST 98
8P5040 CROSS TUBE TRNSPRT REST 395
8P8645 BOX HARDWARE PARTS 1000