Summers 50' Superroller - Manual (Page 11)

2-1
SECTION 2 - ASSEMBLY
GENERAL ASSEMBLY SAFETY PRACTICES
1. READ AND UNDERSTAND Operator’s Manual before assembly of machine.
2. Machine should be assembled in a horizontal (field) position only.
3. If machine is to be assembled INDOORS, check that exit door is:
MACHINE WIDTH MINIMUM DOOR WIDTH MINIMUM DOOR HEIGHT
41’ 17’2” 14’2”
45’ 17’2” 15’2”
50’ 16’10” 16’2”
4. Reference to “RIGHT” and “LEFT” is determined when machine IS VIEWED FROM THE
REAR.
5. Reference to “FORWARD” means TOWARDS THE TRACTOR.
6. Reference to “REAR” means AWAY FROM THE TRACTOR.
SAFETY-ALERT SYMBOL
This symbol is an alert to the potential
for personal injury. This symbol means
ATTENTION! BECOME ALERT!
YOUR PERSONAL SAFETY IS INVOLVED!