VariZoom VZCINEMAPRO-K4 - Manual (Page 10)

Additional Head options-
The Cinema Pro head can be fitted with either a 100mm half ball, or Mitchell mount. A Mitchell ring
adapter is available for old style Mitchell mount.
An adapter is also available to adapt Mitchell mount to Jimmy Jib style mount.
Wireless control is available, and can controlled from up to ¼ mile. Up to 1 mile line of sight.
Additional controller cables are available in 50’ or 100’ increments. A male to female LEMO coupler is
available to join the cables.
Cinema Pro XLR power cables are available in 30’ or 75’ increments.
2” head extension blocks are available, and will increase the underslung clearance range from 16.5”-
18.5” to 18.5”-20.5”. A maximum of two can be installed. This will also increase clearance if using a
larger lens.
¼” or 1/8” nodal line offsets can be installed on the Cinema Pro’s camera mounting plate to line of the
center of the lens when necessary.
Dedicated video sliprings can be fitted on the Cinema Pro head to allow high quality SD video to pass
through the head. There is a 2db signal loss through this dedicated slip ring, so HD SDI is not supported
unless a line driver is introduced. This option will only support HD for monitoring purposes – the signal
will not be of broadcast quality.
HD hardwiring is available for a broadcast-quality HD video signal. (This cable will bypass the slipring,
and limit pan and tilt movements to 720°)