VariZoom VZSPG-PZFI - Manual

Recording:
Press the button above the zoom rocker to activate the camera’s pause/record function.
Zoom:
Your VZ-PG-PZ features a high-sensitivity variable zoom rocker designed for thumb control. Pressing on the left side
zooms out (Wide) and pressing on the right side zooms in (Telephoto). The rocker is pressure sensitive and allows you to smoothly
ramp up and down in speed by applying more or less pressure. Zoom speed is dependent on the pressure applied to the rocker, but
each camera model may vary slightly in its maximum and minimum speed capabilities. The PG-PZ will access the entire range of any
compatible camera’s zoom speeds, but some models can zoom slower or faster than others. For example, a DVX100B at its slowest
speed takes about 30 seconds to zoom through the entire Wide-Telephoto range, but the original DVX100A took 20 seconds, so the B
version has a much slower minimum zoom speed.
Warranty Warning!
Do not open your control device. Opening may void your warranty
and possibly render the controller useless. If you need service, send your controller to a
Varizoom Service Center only. All controllers have a 2-year parts and labor warranty. Please,
save your receipt and send us your comments and suggestions. Thanks!
Operating Instructions
VZ-PG-PZ
Power:
The VZ-PG-PZ controller does not require batteries
or external power. Just plug the cable in and it’s ready to use.
Tripod / Jib Mount:
Your VZ-PG-PZ controller
comes with a heavy-duty quick-release clamping system to attach
firmly to your tripod pan handle, shoulder support or camera
crane/jib.
Thank you for purchasing the VariZoom VZ-PG-PZ remote
zoom controller for Panasonic camcorders. Here are some
important guidelines for safe and effective operation…
-- please keep this document for your records & reference --
VariZoom Lens Controls - 888-826-3399 – 512-219-7722
visit us on the web at www. varizoom .com
Connection:
Insert the VZ-PG-PZ cable connector
into the ‘Zoom S/S’ / ‘Cam Remote’ jack on the Panasonic
camcorder. DO NOT PLUG THIS UNIT INTO A LANC PORT
ON A SONY/CANON CAMCORDER. When properly
connected, the cable should be firmly seated within the jack.
*****
WARNING: ABUSE OF THE CONNECTOR MAY RESULT IN
DAMAGE NOT COVERED BY THE WARRANTY. TREAT
THE CONNECTOR GENTLY.