High Country Tek DRC Series - Manual (Page 5)

021-DRC Rev A DRC User Manual 5
Copyright © High Country Tek, Inc. – 2013
DRC
Valve Controller
DRC Controllers
The DRC controller drives proportional solenoid valves. The output current is proportional to the command input.
Once configured, the settings are permanently stored in the controller memory.
DRC FEATURES
 Easily configured using HCT Graphical User Interface (GUI) or HCT Hand Held Interface (HHI)
 LED indication of power, output current and fault status
 DIN-rail mount housing with removable terminal blocks
 Multiple modes for single and dual coil applications, programmable enable input
 All input and output limits are independently adjustable
 Adjustable output with short circuit protection, adjustable ramp up and ramp down rates
Operating Specifications
Supply Voltage 9 to 32VDC
Supply Current Valve current + 50mA (Quiescent Max)
Output Current DRC-x01: 120mA MAX. per channel
DRC-x06: 600mA MAX. per channel
DRC-x12: 1.2A MAX. per channel
DRC-x25: 2.5A MAX. per channel
Coil Resistance 2Ω MIN.
Reference Voltages +10V, -10V @ 20mA (DRC-Vxx versions only)
Dither Frequency 30, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 1000 Hz
Analog Input Range DRC-Vxx: -10V to 10V DRC-Axx: 0 to 20mA
Analog Input Impedance DRC-Vxx: 38kΩ DRC-Axx: 250Ω
Operating Temperature Range -20º to 70º C; -40º to 85º C (storage)
Enclosure Polyamide
Dimensions Inch: 0.69 W x 4.50 H x 4.30 D; Mm: 17.5 W x 114.5 L x 109.4 H