Mvp-f, Closed-loop controller – High Country Tek MVP-F Series User Manual
Page 14
021-MVP-F Rev A
MVP-F User Manual
14
Copyright © High Country Tek, Inc.
– 2013
MVP-F
Closed-loop Controller
MVP-F closed-loop control:
Place the controller in Mode 3
–
Open loop to fine tune the min and
max feedback range.
Place the controller in Mode 1
–
Normal
When command (4.84V) is greater
than the feedback (1.28V), the
MVP-F will output max current
(600mA).
When command (1.04V) is less than
the feedback (1.32V), the MVP-F will
output 0 current.