Software – High Country Tek DVC61 User Manual

Page 7

High Country Tek

•

Electronic Solutions for Industry

March 28, 2007

Software

*Note: For detailed information on DVC61 software see the DVC Programming User Guide.

Programming Tool:

• Each Digital input can be

named (16 characters).

• Each Digital inputs’

debounce time can be set:

0 to10.24 seconds in 10 ms
increments.

• Each Digital input can be set

toggle/no toggle.

• Display Backlighting can be

changed (0-100%).

• Display Contrast can be

changed (0-100%).

• Up to 12 variables can be

programmed to display on
each DVC61 screen.

• Different screens can be

programmed to display on
each DVC61.

Program Loader Monitor:

• MAC ID (range: 0-63) Note:

every module must have a
different MAC ID

• CAN Bus Baud Rate

(125kbps, 250kbps, 500kbps)

• Default or Blank screen on

power up. Default screen
consists of High Country Tek
information.

• Default Display Backlighting

(0-100%) (Backlight on
power up)

• Default Display Contrast (0-

100%) (Contrast on power
up)

*Note: All DVC61 modules will ship from HCT with the MAC ID set to 61 and the CAN Bus
Baud Rate set to 125k unless otherwise noted.