ARI Armaturen BR015-ZIVA-G EN - Manual (Page 6)

Page 6 Rev. 0040201000 0511
Operating and installation instructions
ZESA
®
/ GESA
®
/ ZIVA
®
-Z / ZIVA
®
-G
4.4 Technical data - remarks
for
- Principal dimensions
- Pressure-temperature-ratings, etc. refer to data sheet.
4.5 Marking
Details of the CE-marking on the valve:
fig. 6: Worm gear ZESA
®
/GESA
®
and ZIVA
®
-Z/ ZIVA
®
-G
- Gear type (actuation by hand wheel, clockwise for closing).
The CLOSE-position can be adjusted by ± 5° by a stop screw.
The stop screws are self-sealing and self-locking (refer to Fig. 7).
- Refer to separate operating and maintenance manual for drive (electric or pneumatic).
CE-marking
0525 Notified body
Manufacturer Address of manufacturer:
refer to item 11.0 Warranty / Guarantee
Typ Type
Bj. Year of manufacture
According to the Pressure Equipment Directive table 6, annex II, valves without safety
function are only allowed to bear the CE-marking DN32 onwards.
Lock nut
Position indicator