Specifications, Ordering information – Red Lion RS Relay System User Manual
Page 2
The RSCJMP can be used to bridge up to 80 adjacent Relay Blocks with total
currents as high as 30 A. For currents above 6 A, the Buss Block must be used
as the starting point. This cut-to-length jumper is available in three colors, and
is shipped in packages of 2 pieces.
SPECIFICATIONS
1. MAX. CURRENT: 30 A
2. LENGTH: 19.7" (500 mm)
3. COLOR: Available in Red, Blue, and Gray
The 9 mm wide Buss Block is the same shape as the RSRLYB Relay Block.
It can be used as a starting point for the continuous jumper in applications
requiring up to 30 A. In applications that require less than 6 A, the starting point
for the jumper(s) can take place at one of the Relay Blocks.
SPECIFICATIONS
1. MAX. CURRENT: 30 A
2. MAX. VOLTAGE: 250 V
3. CONSTRUCTION: Case body is gray, Polymide PA non-reinforced
4. CONNECTIONS: 10 AWG max. Torque 4-6 in-lb.
5. WEIGHT: 0.077 lb. (34.9 g)
The Barrier is always required at the start and end of a Relay System to
provide protective separation according to VDC 0106-101. The Barrier should
also be used to isolate adjacent Relay Blocks with voltage potentials greater
than 250 V. The RSBARR is equipped with prescored breakout points at the
bridging positions so that individual bridges can pass through if needed. The
RSBARR00 is shipped in packages of 2 pieces.
SPECIFICATIONS
1. COLOR: Black
The RSMARK00 Relay Markers can be used to label the Relay Blocks. After
labeling or writing on the Marker, it is snapped onto the engagement lever of the
Relay Block, providing a visual means of identification. The RSMARK00 is
shipped in packages of 100 pieces.
SPECIFICATIONS
1. COLOR: White
MODEL NO.
DESCRIPTION
QUANTITY/PACKAGE
PART NUMBER
RSRLYB
Relay Block
5
RSRLYB00
RSBUSS
Buss Block
1
RSBUSS00
RSBARR
Barrier
2
RSBARR00
RSRSTP
Rail Stop
2
RSRSTP00
2-Position Jumper Red
20
RSJMPR10
RSJMPR
2-Position Jumper Blue
20
RSJMPR20
2-Position Jumper Gray
20
RSJMPR30
Continuous Jumper Red
2
RSCJMP10
RSCJMP
Continuous Jumper Blue
2
RSCJMP20
Continuous Jumper Gray
2
RSCJMP30
RSMARK
Relay Marker
100
RSMARK00
RSRLY1
Replacement Relay
5
RSRLY100
ORDERING INFORMATION
CONTINUOUS JUMPER-RSCJMP
RELAY MARKERS-RSMARK
BARRIER-RSBARR
BUSS BLOCK-RSBUSS