Red Lion ICM5 - Manual (Page 4)

CONNECTING TO PARADIGM INTERFACE
OFF 422/ ON 485
OFF 4 WIRE/ ON 2 WIRE OFF 4 WIRE/ ON 2 WIRE
OFF 422/ ON 485
PULL
UP
PULL
DOWN
9600 BAUD
19200 BAUD 38400 BAUD 57600 BAUD 115200 BAUD
120
Ω
TERMINA
TION
6 5
**
3 2 1
** * ON
4
** ** *
2 1 9 8 7
10
ALARMS EXIT MENU LOWER RAISE MUTE PREV NEXT
PARADIGM INTERFACE
OFF DTE/ ON DCE OFF DTE/ ON DCE
NC
OFF DCE/ ON DTE OFF DCE/ ON DTE
6 7
ON
3 5 4
P890301Z PARADIGM
PROGRAMMING CABLE
TO PROGRAMMING
PORT
ICM5
INSTALLATION
The unit is equipped with a universal mounting foot for attachment to
standard DIN style mounting rails, including G profile rail according to
EN50035 - G32 , and top hat (T) profile rail according to EN50022 - 35 x 7.5
and 35 x 15. The unit should be installed in a location that does not exceed the
maximum operating temperature and provides good air circulation. Placing the
unit near devices that generate excessive heat should be avoided.
G Rail Installation
To install the ICM5 on a "G" style DIN rail, angle the module so that the
upper groove of the "foot" catches under the lip of the top rail. Push the
module toward the rail until it snaps into place. To remove a module from the
rail, push up on the bottom of the module while pulling out away from the rail.
T Rail Installation
To install the ICM5 on a "T" style rail, angle the module so that the top
groove of the "foot" is located over the lip of the top rail. Push the module
toward the rail until it snaps into place. To remove a module from the rail,
insert a screwdriver into the slot on the bottom of the "foot", and pry upwards
on the module until it releases from the rail.
TYPICAL RS-485 CONNECTIONS USING RJ-11
1
W/RJ11
PRODUCT
RED LION
4
7
10
11
5200 BAUD
57600 BAUD PULL
DOWN
19200 BAUD
9600 BAUD
38400 BAUD
OFF 4 WIRE/ ON 2 WIRE OFF 4 WIRE/ ON 2 WIRE
120
Ω
TERMINA
TION
* ** * ON
2 1 3
*
10
8 9 6 4 5 7
PULL
UP
CABLE
RS232
ICM5
OFF DTE/ ON DCE OFF DTE/ ON DCE OFF DCE/ ON DTE OFF DCE/ ON DTE
OFF 422/ ON 485 OFF 422/ ON 485
** * *
7 6 4 3
NC
2 5 1
ON
RJ-11 JUMPER
CBJ11BD5
8 9
11 12
2 3
6 5
TROUBLESHOOTING
For further technical assistance, contact technical support at the
appropriate company numbers listed.
MODEL NO. DESCRIPTION PART NUMBER
CBJ
ICM5
6" RJ-11 Jumper Cable
RS-232/RS-485 Converter Module
CBJ11BD5
ICM50000
ORDERING INFORMATION
TYPICAL CONNECTION FOR RS-485 DEVICES
OFF DCE/ ON DTE OFF DCE/ ON DTE OFF DTE/ ON DCE OFF DTE/ ON DCE
PULL
DOWN
38400 BAUD 9600 BAUD 19200 BAUD 57600 BAUD 115200 BAUD
OFF 422/ ON 485 OFF 422/ ON 485
120
Ω
TERMINA
TION
PULL
UP
OFF 4 WIRE/ ON 2 WIRE OFF 4 WIRE/ ON 2 WIRE
7
6
8
ON
7
* * * * *
2 5 3 4 1 6
RXA
RXB
**
4
NC
2 3 1 9 10
ON * *
6 7 5
2
3
5
4
TXB
SPLY
PWR COMM
TXA
COMM 485/
422
1 + VDC
+VDC COMM.
TX/RX (+) TX/RX (-)
11
LEGEND
3 1 2
TX EN.
10 6 7 8 9 4 5
RS485
COMM 1 3 2 N/C
11 8 7 4 5 6 9 10
TC COMM N/C RT
D
3 1 2
AC
~ ~
AC
USER INPUTS
RLY4
COMM 24
25
RLY3
RLY2 22
23
RLY1
COMM
20
21
15
13
14
OUT
-
-
OUT
+
20mA
12 + 10V
- N/C 15
14 - COMMON
- A(+) 13
12 - B(-)
PAX
NOTE: FOR CONNECTIONS TO RS485
PORT ON PARADIGM PRODUCTS, A &
B ARE REVERSED.
*
- Application Dependent
*
- Application Dependent
*
- Application Dependent