Power Jacks E-Series - Machine - Manual (Page 6)

6 www.powerjacks.com
1
Introduction
1.3 Introduction
E-Series screw jacks are exclusively designed for carrying out linear motion movements in accordance with the
specification detailed in Power Jacks product information and this maintenance manual.
Any other application other than specified or one going beyond the above mentioned capacity is unauthorised. The
manufacturer is not liable for damages resulting from such applications. The user alone has to bear the risk.
Since the screw jacks can be applied in various areas, the user is responsible for the specific application of use.
The E-Series machine screw jacks have been designed to comply with Machinery Directive 2006/42/EC and with
the relevant essential health and safety requirements as applies to the equipment itself. Where fitted, Electric
Motors conform with Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC.
1.4 Safety Instructions in The Operating Manual
This symbol indicates potential dangers to people.
Comply with the instructions in order to avoid injury.
This symbol indicates potential dangers to the unit.
Comply with the instructions in order to avoid damage to the unit.
This symbol indicates special information on:
• The best possible use of the unit
• How to facilitate operation of the unit
1.5 Residual Risk and Hazards
1.5.1 Should a risk of damage to material or injury to persons remain despite the structural safety of
the E-Series screw jack(s), the user must draw attention to such hazards by means of suitable
warning notices and written instructions indicating safety precautions.