3 - updating the driver, 4 - uninstalling the driver – HighPoint RocketRAID 2322 User Manual

Page 70

Text mode
Original mode

Step 4 Configure the System to Mount Volumes at Startup

Instruct the system to automatically mount the array by modifying the file /etc/fstab.

Example: Add the following line to instruct the system to mount /dev/da1s1e to
location /mnt/hpt after startup:

/dev/da1s1e /mnt/hpt ufs rw 0 0

3 - Updating the Driver

To update the driver with a newer revision, simply reinstall the driver following the
steps discussed in the previous section, “Install the driver on an existing system”.

4 - Uninstalling the Driver

The driver can only be uninstalled when the system is not booting from devices
attached to the RR2322 controller. To uninstall, remove the line rr232x_load=”YES”
located in /boot/defaults/loader.conf, and then delete the driver module /modules/
rr232x.ko or /boot/kernel/rr232x.ko.

FreeBSD Driver Support

6-7