HighPoint RocketRAID 2322 - Manual (Page 30)

RocketRAID 2322 Driver and Software Installation
3 - Creating an Array
To create an array:
1. Highlight the “Management” menu, then select the “Array Management”
function.
2. Click the Create button on the toolbar or select the “Create” command from the
“Operation” menu. The array creation wizard will appear.
3. Select the desired RAID level from the drop-down list.
4. Enter a name for the array using the keyboard (this is optional), and click the Next
button.
5. If you are creating a redundant array (RAID 1, 5, 10, 50), select an initialization
option. If you are creating a RAID 0 or JBOD (volume), skip to step 6:
For RAID 1 and RAID 10 arrays, the default initialization method is “No
initialization”.
For RAID 5 or RAID 50 arrays, the default initialization method is “Foreground”.
If you are creating RAID 5 or RAID 50 arrays, you will be asked to specify a
cache policy:
4-7