HighPoint RocketRAID 2644X4 - Manual (Page 71)

FreeBSD Driver Support
you are installing FreeBSD 7.0 versions:
# dd if=freebsd_7.0.img of=/dev/fd0
Step 4 Install FreeBSD
1. Start installing the FreeBSD by booting from installation CD.
2. If you are installing FreeBSD 5.0 or earlier versions, skip this step. When “Wel-
come to FreeBSD” screen appears, select “6”.
3. When “Hit [enter] to boot immediately or any other key for command prompt”
screen appears, press SPACE key to stop loader from autobooting.
BTX loader 1.00 BTX version is 1.01
Console: internal video/keyboard
BIOS driver A: is disk0
BIOS driver B: is disk1
BIOS driver C: is disk2
BIOS 636kB/74512kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(mailto:[email protected], Sat Apr 21 08:46:
19 GMT 2001)
-
Hit [Enter] to boot immediately, or any other
key for command prompt.
Booting [kernel] in 9 seconds¡-
<-press SPACE key
A prompted label “ok” will appear at the bottom of the screen.
4. Insert RR2644 driver diskette into floppy drive now. Type in
“load diskx:rr2644-x.x” (without quotation mark) and then press enter.
for FreeBSD 4.3-RELEASE
ok load kernel
ok load disk1:rr2644-4.3.ko
for FreeBSD 4.4-RELEASE
ok load kernel
ok load disk1:rr2644-4.4.ko
7-2