HighPoint RocketRAID 2644X4 - Manual (Page 30)

2. Windows should automatically detect the card, and display the “Found New
Hardware” wizard pop-up window. Select “Locate and install driver software”.
When Windows asks: “Windows needs your permission to continue”, select
“continue”.
3. Select “I don’t have disc, show me other options” and then select “Browse my
computer for driver software”.
4. Specify the location of the driver and click “Next”.
5. When asked: “Would you like to install this driver software?”, select “Install”.
6. Reboot the system when prompted. The RocketRAID 2644X4 will be available
for use after Vista reboots.
Installation Verification
After the driver has been installed, and the system has been restarted:
1. Click the Start button, then right-click My Computer icon. Select the Properties
item from the popup menu.
2. In the popup window, select Hardware tab and then click Device Manager
button.
3. Double click the “SCSI and RAID controllers” entry. If the RocketRAID device
entry is not displayed, or there are “?” or “!” marks displayed near the
RocketRAID entry, the driver has not been installed properly. Delete the entries
and reinstall the driver.
4-5
RocketRAID 2644X4 Driver and Software Installation