HighPoint RocketRAID 2644X4 - Manual (Page 41)

RocketRAID 2644X4 Web-RAID Management Interface
5-10
Note: S.M.A.R.T attribute data is drive-specific. The software includes a list of
definitions for popular drive models/manufacturers. Unknown S.M.A.R.T. attributes
will be shown as “unknown”. You can add the attribute definitions for your drive in
the file smart.def (which resides in the software installation directory).
Rescan Devices
When you physically add drives to the controller while the system is running, you
can rescan the controller to reflect the change.
To rescan the devices:
1. Select menu “Manage - Device”.
2. Click “Rescan Devices” button.
Note: When you are hot-plugging an entire array, run rescan only after all array
members (hard disks) have been physically plugged or unplugged from the system.
You can rescan all the devices at once using the Rescan function on the Array
Management page.