Vaisala SHM40 - Manual (Page 43)

Chapter 4 ____________________________________________________ Using the HM40 Indicator
VAISALA _______________________________________________________________________ 41
When the screen is held, the top of the display
displays the current date and time. This is useful
when you want to record the current data (take a
photograph or write it down).
If date and time have not been set, the top of the
screen will simply read “HOLD”.
CAUTION When the view is held, you can reset all measurement data by pressing
the Reset button. This will clear all graphs and tagged points.
NOTE If you keep pressing the right function button (long press), the HM40 will
tag the point without freezing the screen.
Main Menu
You can open the menu from the measurement view at any time by
pressing the menu button.
If you are already in the menu, pressing the menu button returns you to
the measurement view. If you are in a submenu, the menu button returns
you to the previous menu level.
Use the arrow buttons to move up and down in
the menu, and function buttons to operate the
menu options. Typical functions in the menus
are:
- View and Enter open the selected menu
option or submenu.
- Change and Set change the value of the
selected option.
- Back returns to the previous menu view.
- Exit closes the menu and returns to the
measurement view.
NOTE Some menu screens have more content than can be visible at one time.
This is indicated by a scroll bar that appears on the right side of the
screen. Use the arrow buttons to scroll up and down.