Audiovox P-48 User Manual

Page 4

-2-

TREBLE CONTROL

To adjust the treble level, first select the Treble mode by pressing
the Select button

so the TRE indication appears on the display

panel. Within 5 seconds of choosing the Treble mode, press the

side of the Level control

to adjust the treble response

as desired. The level will be shown on the display panel from a
minimum of -10 to a maximum of 10 (0 indicates flat response).
The display will automatically return to the normal indication 5
seconds after the last adjustment or when another function is
activated.

LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button

so the BAL indication

appears on the display panel.
Within 5 seconds of choosing the Balance mode, press the
side of the Level control

to adjust the stereo balance to the left

channel speakers or the

side of the control to adjust it to the

right channel speakers. The balance position will be shown on the
display panel from BA.L 10 (full left) to BA.r 10 (full right). When
the volume level between the left and right speakers is equal,
BAL 0 will be shown on the display panel. The display will
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.

FRONT/REAR FADER CONTROL

To adjust the front-rear speaker balance, first select the Fader
mode by pressing the Select button

so the FAd indication

appears on the display panel. Within 5 seconds of choosing the
Fader mode, press the

side of the Level control

adjust the front-rear speaker balance as desired. The fader

position will be shown on the display panel from FA.r 10 (full
rear) to FA.F 10 (full front). When the level between the front and
rear speakers is equal, Fad 0 will be shown on the display panel.
The display will automatically return to the normal indication 5
seconds after the last adjustment or when another function is
activated.

LOUDNESS CONTOUR (LOU)

When listening to music at low volume levels, this feature will
boost the bass and treble ranges to compensate for the
characteristics of human hearing. Press the button to activate this
feature and the indication LOUD will appear on the display panel.
Pressing the button again will deactivate the feature (the LOUD
indication will disappear from the display panel).

AUDIO MUTE SELECTOR (MUTE)

Press this button momentarily to mute the volume from the system
( MUTE will appear on the display panel). Pressing the button
again or adjusting the Volume control

will return to the volume

level setting in use before the Mute function was activated.

AM/FM BAND SELECTOR (BND)

Each time this button is pressed, the radio band is changed. The
indications AM1, AM2, FM1, FM2 or FM3 will appear in the
display panel according to your selection.
During CD changer play, pressing this button will return to radio
or tape operation, depending on which was the last mode in use
prior to CD changer operation.

MANUAL UP/DOWN TUNING (

)

To manually select a radio station, momematrily press the Up
Tuning (

) button to advance the unit one digit higher or the Down