Performance data sheet – Haws 2500.CT User Manual
Page 9

6/13
Model 2500.CT
Page 9 of 12
PERFORMANCE DATA SHEET
 
IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with 
your actual water treatment needs. It is recommended that, before purchasing a water treatment unit, 
you have your water supply tested to determine your actual water treatment needs. 
 
 
Substance
Influent Challenge 
Concentration 
Reduction 
Requirement 
Maximum Permissible 
Product Water 
Concentration 
Average Percent 
Reduction 
Chlorine, 
Taste 
and Odor 
2.0 mg/L ± 10%
≥50%
N/A
96.6%
Lead
0.15 mg/L ± 10%
N/A
0.010 mg/L
99%
Cyst
Minimum 50,000/L
99.95%
N/A
99.99%
 
This system has been tested according to NSF/ANSI 42/53 for the reduction of the substances listed. 
The concentration of the indicated substances in water entering the system was reduced to a 
concentration less than or equal to the permissible limit for water leaving the system, as specified in 
NSF/ANSI 42/53. 
 
Testing was performed under standard laboratory conditions. The contaminants or other substances 
removed or reduced by this water trea
tment device are not necessarily in all users’ water. Filter
performance may vary based on local water conditions. 
 
 
 
 
 
 
 
 
 
